The use of caulk on a staircase gives a seal between the wall as well as the staircase and any gaps that could occur involving joints or the boards of a hard-wood staircase. The gaps could be displeasing and are a grime catcher. The method is simple enough and demands the use of a water- . It might be beneficial to use a silicone caulk which could be painted when caulking between the fringe of of the wall as well as the stairs but isn’t required.
Clean the gaps of the staircase to eliminate any particles. Sweep the location if feasible. All gaps to eliminate as much debris as possible.
Insert the silicone caulk.
Cut the suggestion in the silicone caulk tube at a 45-degree angle using the knife of a carpenter.
Until handful of of caulk is extruded in the finish squeeze the trigger on the gun. Wipe the tip of the caulk tube to clear.
Position the suggestion of the silicone caulk at one end of a a spot. The gun will sit at a 45-degree angle to the gap.
Squeeze the trigger on the gun while moving across the gap in a steady and gradual pace. Extrude a type of caulk to the gap. Stop squeezing the trigger and eliminate the suggestion of the silicone caulk at the conclusion of the gap.
Fill each gap in much the same.
Wipe excess caulk in the area using a moist cloth after every gap is stuffed, or sponge.