The best way to Drill Through Glass Tile

The best way to Drill Through Glass Tile

Whether you’re making changes to a current glass-tiled place or beginning a fresh setup job, it might be required to drill holes throughout the glass tiles to adapt conduits or fixtures. If you’re willing to patiently work with the job, although this might seem hard, the procedure could be finished.

Installed Tile

Tear off two bits of masking tape and stick the sections to the top layer of the tile in a “X” pattern on the region in which you want to drill a hole. When drilling, it will help to keep the drill bit. Create a reference mark in which you would like to drill.

Attach -encrusted carbide bit to your own drill. If your plan is to anchor a fixture use a bit which is 1/8-inch bigger than the anchoring . that are screws This additional space will prevent pressure from being transferred through the anchor in the fixture also to the glass tile.

Place the end of the drill-bit on the mark. Drill in a slow-speed with steady pressure. Keep the drill-bit perpendicular to the tile to prevent splintering. Sometimes spray a mist of water throughout the drill-bit to maintain it lubricated. Drill to the desirable depth.

Uninstalled Tile

In which you want to drill a hole Mark again of the glass tile. Set the tile on a scrap bit of MDF board with all the backside facing upward. Align the drill-bit with all the reference mark and drill a tiny pilot hole. Turn tile over.

Knead it in to a 1/2- and get a ball of plumber’s putty inch-diameter, 10-inch-long . Join the ends of the putty to make a circle and set it around the region at which you are going to drill. Press on the circle of putty on the tile to to make a seal. As you are drilling this acts as a short-term dam to to put on water. Fill the circle with water.

Align the end of the drillbit with pilot hole and contain the the drill perpendicular. Utilizing a speed that is slow, lightly use pressure that is steady. Work in a rate that is slow before you’ve got gone via the tile, and continue drilling.

See related